https://www.3dcontentcentral.com/external-site-embed.aspx?format=3D&catalogid=171&modelid=1019654&width=250&height=250&edraw=true
4inch HDMI LCD, 800x480, IPS
4inch Resistive Touch Screen LCD, HDMI interface, IPS Screen, Designed for Raspberry Pi
4inch Resistive Touch Screen LCD, HDMI interface, IPS Screen, Designed for Raspberry Pi
- 800×480 hardware resolution
- Resistive touch control
- IPS technology, high quality, and perfect displaying from the very wide viewing angle.
- It is compatible and can be directly inserted in any version of Raspberry Pi (For the Raspberry Pi 1 B and Raspberry Pi Zero, HDMI cable is required and should be purchase separately).
- Drivers provided (works with your own Raspbian/Ubuntu/Kali and Retropie system directly)
- Also works as a computer monitor, in this case, the touch panel is unavailable and HDMI cable is required.
- When only used for display, does not occupy any I/O resources (using touch function will occupy I/O resources).
- Backlight control to lower power consumption.
Hardware connection
- Plug the LCD to your Raspberry Pi:
- There are 40 pins on Raspberry Pi Model A+/B+/2 B/3 B but only 26 pins on the LCD, so you should pay attention to connecting the pins to your Pi accordingly.
- Connect the HDMI Connector to both the HDMI interfaces on the LCD and the Pi.
- You should connect the LCD to Raspberry Pi Model B or Raspberry Pi Zero with an HDMI cable rather than an HDMI Connector.
- Turn on the "backlight" switch on the back of the LCD.
You can enable the touch in two ways: Method 1. install the driver to your Raspbian/Ubuntu Mate OS. Method 2. use the Ready-to-use image file of which LCD driver was pre-installed.